- Raspberry Pi
- Digital & analog sensors
- Development boards
- More +
...where a bunch of geeks got together to make other people's ideas come to life.
This is the 130-size Brushed DC motor. It has a recommended operating voltage of 3 - 12V. At 6V, the no-load speed is about 11, 500RPM, the no-load current is approximately 70mA, and the stall current is around 800mA.
This motor is not as electrically noisy as the FA-130 motor used in many of the Tamiya gearboxes, and it draws much less current. The two motors are the same size and have similar output power, but, with double the voltage and half the current, these units are generally more convenient to use. If you would like to use lower-current motor controllers with the Tamiya gearboxes, you can simply replace the original Tamiya motor with this and you’ll be set!